Shortening the Leading/Trailing Edge Margins
Depending on the paper being used, the margins on the copy vary. You can shorten the leading/trailing
edge margins.
Paper feed direction
Leading-edge margin Trailing-edge margin
CEZ586
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
1. In [Advanced Settings] for the custom paper you are using, 1239: [Margin], and then
decrease the value in the following corresponding settings.
• [BW/FC/S]
[Leading Edge], [Trailing Edge]
• [FCS]
[Leading Edge: Clr/Sp], [Leading Edge: White]
[Trailing Edge: Clr/Sp], [Trailing Edge: White]
• The adjusted margin cannot be applied to masked images that are solid-filled or contain ruled lines
at the leading/trailing edges.
• Reducing the leading/trailing edge margin may result in a paper jam on the fusing belt stripper
plate.
Shortening the Leading/Trailing Edge Margins
323
To Next Page
Loading...
