The Flow of Printing a Metallic Color
1. Creating a document to print that contains the colors of PANTONE Metallics
page 7 "Specify a Metallic Color in the Print Data"
2. Setting the silver toner on the machine
For details about how to set toner on the machine, see the manual provided with the toner.
3. Importing the print data into Fiery Command WorkStation
page 8 "Importing the Print Data into Fiery Command WorkStation"
4. Checking the setting values of the metallic colors
page 17 "Metallic Color Number/Setting Values Correspondence Table"
5. Registering the setting values of the metallic colors on Fiery Command WorkStation
page 10 "Registering the Setting Values of the Metallic Color in Fiery Command WorkStation"
6. Printing the document
page 14 "Printing Data in Fiery Command WorkStation"
The Flow of Printing a Metallic Color
5
To Next Page
Loading...
