5. Insert the sharp end of the ring opener into one end of the ring comb, and then push
it all the way through the ring comb.
The rings of the comb will open as you push the ring opener through them.
6. Insert the new pages.
7. Holding the sides of the ring opener, carefully press down the opened rings.
To close a 50-sheet type binding ring comb, use the side of the ring opener that has the
smaller grooves.
To close a 100-sheet type binding ring comb, use the side of the ring opener that has the
larger grooves.
The rings of the comb will close as you press down with the ring opener.
8. Remove the ring comb from the ring stand.
• When using the ring opener, take care to avoid injuring self or others and damaging nearby
equipment.
5. Paper Specifications and Adding Paper
150
To Next Page
Loading...
