Ricoh Pro C9210 - Page 179

Setting Items Selection Default Value
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
Off
Curl Correction
Level: Small
Curl Correction
Level: Medium
Curl Correction
Level: Large
Curl Correction
Level: Small
Curl Correction
Level: Medium
Curl Correction
Level: Large
Off
0304 Detect JAM099
Specify whether or not to detect double feed (multi-sheet feeding).
If this is set to [On], the machine can detect double feeding, which prevents blank sheets turning up in
the delivered paper.
The machine may erroneously detect double feeding when using special paper (double-layer paper,
such as label paper). If such erroneous detection occurs, set this to [Off].
This setting is invalid when you are printing from the tray for which custom paper is allocated. For such
paper, the value specified in [Detect JAM099] in [Advanced Settings] takes precedence.
Setting Values
177