Execute this function when vertical streaks appear on the printed page.
Setting Items Description
All Colors
Black
Cyan
Magenta
Yellow
Press [Execute] to execute the function.
Keep the front cover of the main unit closed until
the process is completed.
0512 Fusing Belt Smoothing Setting
Specify the condition to execute Fuser Belt smoothing.
Setting Items Selection Default Value
Auto Exe: Belt Scratches Off
Frequently (With
Density Adj)
More Frequently
Most Frequently
Frequently (With
Density Adj)
Feed Speed High
Middle
Low 1
Low 2
Low 3
Low 3
0513 Smooth Fusing Belt
Smooth the Fuser Belt to remove vertical and horizontal lines from the printouts.
Vertical or horizontal lines may appear when printing on paper that is larger than the paper used
immediately before it.
In such case, press [Execute] to cause a roller to press on the fusing belt and prevent vertical and
horizontal lines. Select [Belt Scratches] if vertical or horizontal lines appear on the edges of the paper.
Select [Uneven Gloss: Short Time] if there are patches of uneven glossiness.
6. Adjustment Settings for Operators
182
To Next Page
Loading...
