The value set here is added to the default values, which are 1, 2, and 3. Set a negative value to reduce
the number of times the finisher folds booklets. Set -1, -2, or -3 to not fold booklets that have 1 to 13
sheets, 14 to 15 sheets, or 16 to 25 sheets, respectively.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Set 0 9 -3 1 times
0622 Paper Alignment for Booklet: With Feed
Adjust the Tip Stopper movement when using the booklet binding function on Finisher SR5050 or
Booklet Finisher SR5060.
Use the function to reduce the dispersion of paper orientation in the feeding direction due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the amount of movement.
Setting Values
199
To Next Page
Loading...
