0705 Letter Fold-out Position 1: 1 sheet Fold
Adjust the fold position of the bottom segment (S2) of letter foldout sheets (1 sheet fold) when using the
fold unit.
Press [ ] to increase and [ ] to reduce (S2).
This setting will be applied if the 1 sheet fold function is enabled.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Paper feed direction
S2
L
DWP563
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 SEF
0.0 4.0 -4.0 0.2 mm
B5 JIS SEF 0.0 3.0 -3.0 0.2 mm
12 × 18 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
8
1
/
2
× 11 SEF
8K SEF
Other Paper Sizes
0.0 4.0 -4.0 0.2 mm
0706 Letter Fold-out Position 1: Multi-sheet Fold
Adjust the fold position of the bottom segment (S2) of letter foldout sheets (multisheet fold) when using
the fold unit. This setting will be applied if the multisheet fold function is enabled.
Press [ ] to increase and [ ] to reduce (S2).
6. Adjustment Settings for Operators
206
To Next Page
Loading...
