6. Press [Paper Size].
7. Select a paper size.
8. Press [Paper Weight].
9. Specify the paper's weight.
You can also specify [Paper Thickness].
10. Press [Paper Type].
11. Specify the paper type.
12. Specify other items, such as [Coated Paper Type], [Paper Color], [Prepunched],
[Textured], [Apply Duplex], and [Apply Auto Paper Select] as necessary.
13. Press [Save Paper].
The [Save Custom Paper] screen is displayed.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color],
[Prepunched], or [Textured] and press [OK], a message appears to notify you that the
[Advanced Settings] will be initialized. To apply the changes for those settings, select
[Change]. To cancel the changes, select [Do not Change].
14. Press [Save].
15. Press [Program].
16. Press [Exit].
Custom paper is saved under the smallest unregistered number.
17. Press .
18. Press the [Home] ( ) icon at the center bottom of the screen.
• If you want to use glossy paper, select [Coated: Glossy] or [Coated: High Gloss] for [Coated
Paper Type]. If you want to use matte paper (including silk, dull, and satin paper), select
[Coated: Matte] for [Coated Paper Type].
• For details about custom paper settings, see page 35 "Custom Paper Settings".
• For details about [Advanced Settings], contact your machine administrator.
Registering a new custom paper by modifying an existing paper
You can open and modify the settings of a registered custom paper and register them as a new custom
paper.
This function is useful when registering paper that is the same type as an existing paper, but a different
size.
Depending on which settings you modify, details of a newly registered custom paper will be as follows:
Registering Custom Paper
27
To Next Page
Loading...
