6. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
The list of custom paper whose configurations are similar to those of the scanned paper
appears.
7. Select the custom paper you want to use, and then press [Import].
8. Press [OK].
9. Press [Exit].
The selected custom paper is imported from the Master Library.
10. Press .
11. Press the [Home] ( ) icon at the center bottom of the screen.
• The list displayed in Step 7 includes custom paper with configurations whose match rates are
80% or higher.
• You can check and change the settings of the registered custom paper such as the paper size
setting on the [Custom Paper Management] screen. For details about modifying the custom
paper, see page 35 "Modifying a Custom Paper".
Registering a new custom paper with the Media Identification Unit
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [CustomPaper Management].
Registering Custom Paper
31
To Next Page
Loading...
