Ricoh Pro C9210 - Page 42

1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [CustomPaper Management].
3. Select the name of the paper that you want to register.
If the paper you want to select is not displayed, use [Jump to Row], or scroll through the screen until
the desired item is displayed.
4. Press .
5. Press [Advanced Settings].
6. Enter the login user name and password of the administrator if an authentication screen
appears.
The authentication screen does not appear if you log in as an administrator.
7. Press [Reg Align Frt&Bck Img Use Template].
8. Enter the value you wrote on the printed template.
Enter the measured values in the corresponding fields on the [Side 1] and [Side 2] tabs.
Select the item you want to enter and use the numeric keypad to enter the value.
You can enter values from 0.1 to 999.9 mm in 0.1-mm increments.
9. Press [Apply].
3. Useful Functions
40