Troubleshooting > Printer Status Monitor Errors > No Paper/Tray Not Detected (Tray 1)
No Paper/Tray Not Detected (Tray 1)
No paper is loaded in tray 1 or paper is not loaded properly. Follow the procedure below to load paper properly.
Lift the output tray.
Pull out tray 1.
● Pull tray 1 completely out. Take care not to drop it.
Squeeze the paper guides on both sides, and then adjust them according to the paper size.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0010.htm (1 of 4)2005/10/05 12:05:11
To Next Page
Loading...
