6. Push tray 1 gently in until it stops.
7. Lower the output tray.
8. Slide the envelope selector to the forward position .
9. Open the printer properties dialog box from the application.
10. On the [Setup] tab, click [Semi-gloss Photo Paper] in the [Paper type:] list.
11. Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
12. Make print settings, and then click [OK].
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0008.htm (3 of 4)2005/10/05 12:06:18
To Next Page
Loading...
