Printer Driver > Maintaining the Printer Using Utilities > Clean Print-heads (Full)
Clean Print-heads (Full)
Follow the procedure below to perform a thorough print-head cleaning. Since this consumes more ink than a normal
head cleaning does, perform this when the problem persists after performing a normal head cleaning.
● When the Print cartridge is empty, replace it instead of performing a print-head cleaning. After a Print cartridge is replaced, a print-head
cleaning will be automatically performed.
1. Slide the envelope selector to the forward position.
2. Open the printer properties dialog box.
3. Click the [Maintenance] tab.
4. Click [Clean Print-heads (Full)].
5. In the [Select print-head(s)] area, select a color.
6. Click [Next >].
7. Select the [Clean Print-heads (Full)] check box.
8. Click [Next >].
Head cleaning starts.
❍ Do not perform another operation before cleaning is complete.
9. Click [Finish].
❍ To check the condition of print-heads after cleaning, select the [Print nozzle check test pattern] check box, and then click [Next >].
The nozzle check starts.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0085.htm (1 of 2)2005/10/05 12:07:43
To Next Page
Loading...
