Configuring the SNMP Settings
Click [SNMP] to display the page for configuring the SNMP settings.
SNMP
Item Description
SNMP Select whether SNMP is active or inactive for the interface board(s).
SNMPv1,v2 Setting
Item Description
SNMPv1 Trap
Communication
Select whether to send SNMPv1 trap.
SNMPv2 Trap
Communication
Select whether to send SNMPv2 trap.
Community
Item Description
Community Name Enter the name of the community to which the network interface board belongs,
using up to 15 characters. If the community name is different from that of the
hosts, requests from the hosts will not be accepted.
4. Configuring the Machine Using Utilities
42
To Next Page
Loading...
