Item Description
Access Type In the list, select the access rights to the community.
• Not Accessible
No access permitted.
• read-only
You can read the information, but not edit it.
• read-write
You can read and edit the information.
• trap
Notifies the manager with information about errors. Enter the recipient of
the error notification in the Manager Address box.
Protocol, Active/
Inactive
Configure settings for each protocol used by the community.
Manager Address Enter the host computer's address according to the protocol in use.
Configuring the Administrator Password
Click [Administrator Settings] to specify the administrator password.
Administrator Settings
Item Description
Current Password Enter the current administrator password. The default is "admin133".
New Password Enter the new administrator password. You can enter it using three to eight
characters.
Confirm Password Enter the same password again, to confirm.
Using Web Image Monitor
43
To Next Page
Loading...
