4. Copying Originals
Basic Operation
• If you print test pages or copy when the bypass tray is loaded, the paper in the bypass tray is fed
first.
1. Place the original on the exposure glass.
2. To print multiple copies, press the [Number of copies] key until the number of copies you
want to print is displayed.
Holding down the [Number of copies] key increases the number in increments of 10.
3. Press the [Start] key.
• If a paper jam occurs, printing stops halfway. Open the front cover, remove the print cartridge, and
then remove the jammed paper. If the paper cannot be removed in this way, remove it by opening
the fusing cover. Printing will resume automatically once the cover is closed.
37
To Next Page
Loading...
