• [Bypass Tray Setting Priority]
Select how print jobs using the bypass tray are handled.
•
[Size Mismatch Detection]
Select whether to set the machine to report an error if the paper size does not match the print
job's settings.
[Toner Management] tab
• [Supply End Option]
If [Continue Printing] is selected, refill toner will be available. However no remaining toner
level or messages will be displayed.
[I/O Timeout] tab
• [Fixed USB Port]
Specifies whether the same printer driver can be used for multiple machines or not under USB
connection.
Network Settings
[Network Status] tab
•
[General Status]
You can check [Ethernet Speed], [IPP Printer Name], [Network Version], [Ethernet MAC
Address], and [Active Interface].
• [TCP/IP Status]
You can specify [DHCP], [IP Address], [Subnet Mask], and [Gateway] for IPv4.
[IPv6 Configuration] tab
• [IPv6]
Select whether to enable or disable IPv6.
• [IPv6 Address]
You can specify [DHCP], [Stateless Address], [Link-local Address], [Manual Configuration
Address] for IPv6.
[Network Application] tab
• [Network Print Setting]
Specify whether or not to print using [IPP], [FTP], [RAW], or [LPR].
• [mDNS Setting]
Specify whether to enable Multicast DNS.
[DNS] tab
• [DNS]
Using Web Image Monitor
51
To Next Page
Loading...
Need help?
General
