7. Slide the print cartridge in horizontally. When the cartridge can go no further, raise it
slightly and push it fully in. Then push down on the cartridge until it clicks into place.
8. Carefully push up the front cover until it closes. Be careful not to trap your fingers.
After closing the front cover, wait until the print cartridge is ready to use.
9. Put the protective sheet you removed in Step 5 on the old print cartridge. Then, put the old
print cartridge into the bag, and then put it into the box.
• Make sure to cover the old print cartridge with the protective cover for recycling and environmental
purposes.
•
Comply with the print cartridge Recycling Program, whereby used print cartridges are collected for
processing. For details, ask your sales or service representative.
5. Maintaining the Machine
68
To Next Page
Loading...
Need help?
General
