Using Web Image Monitor
• Some items might not appear, depending on the model type you are using.
Available operations
The following operations can be remotely performed using Web Image Monitor on a computer:
• Displaying the printer's status or settings
• Configuring the printer's settings
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password
• Resetting the printer's configuration to the factory default
• Creating backup files of the printer's configuration
• Restoring the printer's configuration from backup files
Recommended web browsers
• Internet Explorer 6 or later
• Firefox 3.0 or later
• Safari 3.0 or later
Displaying Top Page
When you access the machine using Web Image Monitor, the top page appears in your browser's
window.
1. Launch the web browser.
2. In the web browser’s address bar, enter “http://(machine’s IP address)/” to access the
machine.
If a DNS or WINS server is used and the machine’s host name has been specified, you can enter
the host name instead of the IP address.
The top page of Web Image Monitor appears.
Top page
Every Web Image Monitor page is divided into the following areas:
4. Configuring the Machine Using Utilities
52
To Next Page
Loading...
Need help?
General