Problem Solution
When copying from the exposure
glass, the print area of the copy is
out of alignment with the original.
Place the original copy side down, making sure that it is
aligned to the rear left corner and pressed flat against the
exposure glass.
When You Cannot Make Copies as Wanted
Problem Solution
Photocopied pages are not in
correct order.
On the control panel, change the [Sort] setting under [Copier
Features] to collate pages as you require. For details about
[Sort], see page 176 "Copier Features Settings".
Copied pages are too dark or too
light.
Adjust the image density. See page 91 "Specifying Scan
Settings for Copying".
10. Troubleshooting
302
To Next Page
Loading...
