2Sd 4Orig->Comb 4on1 2Sd
Copies four 2-sided originals to one sheet with four pages per side.
Duplex Copying Manually Using the ADF (for SP 320SFN)
1. Press the [Duplex] key.
2. Press the [ ] or [ ] key to select the desired copy mode, and then press the [OK] key.
3. Press the [ ] or [ ] key to select paper orientation and page order, and then press the
[OK] key.
4. Press the [Back] key.
5. Place all 2-sided originals into the ADF with their fronts facing up.
6. Press the [ ] or [ ] key to select a paper tray.
7. Press the [Start] key.
• After you place the originals, press the [Start] key within the time specified in [System Auto Reset
Timer]. Otherwise, the job is canceled. For details, see page 206 "Administrator Settings".
• If the memory becomes full while originals are being scanned, the job is canceled.
Duplex Copying Manually Using the Exposure Glass (for SP 320SN)
• When printing odd pages in [Manual 2 Sided Scan Mode], the last page cannot be printed.
Before printing the last page, set the [Duplex/Combine] to [Off].
1. Press the [Duplex] key.
2. Press the [
] key or [ ] key to select [Manual 2 Sided Scan Mode], and then press the
[OK] key.
Copying 2-Sided Originals with 2-Sided and Combined Printing
87
To Next Page
Loading...
