EasyManuals Logo

Ricoh SP 325DNw User Manual

Ricoh SP 325DNw
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
Encryption Key Exchange Settings Configuration Flow
This section explains the procedure for specifying encryption key exchange settings.
Machine PC
1. Set the IPsec settings on Web Image Monitor.
1. Set the same IPsec settings as the machine on
PC.
2. Enable IPsec settings. 2. Enable IPsec settings.
3. Confirm IPsec transmission.
After configuring IPsec, you can use "ping" command to check if the connection is established
correctly. Because the response is slow during initial key exchange, it may take some time to
confirm that transmission has been established.
If you cannot access Web Image Monitor due to IPsec configuration problems, disable IPsec on
the [Network 2] tab under [Printer Configuration] using Smart Organizing Monitor, and then
access Web Image Monitor.
For details about enabling and disabling IPsec using Smart Organizing Monitor, see the Smart
Organizing Monitor Help.
Specifying Encryption Key Exchange Settings
This function is available only when an administrator password is specified.
1. Start the web browser and access the machine by entering its IP address.
2. Click [IPsec Settings].
3. Click the [IPsec Policy List] tab.
4. Select the number of the setting you want to modify in the list, and then click [Change].
5. Modify the IPsec related settings as necessary.
6. Enter the administrator password, and then click [Apply].
7. Click the [IPsec Global Settings] tab, and then select [Active] in [IPsec Function].
8. If necessary, specify [Default Policy], [Broadcast and Multicast Bypass], and [All ICMP
Bypass] also.
9. Enter the administrator password, and then click [Apply].
Transmission Using IPsec
113

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP 325DNw and is the answer not in the manual?

Ricoh SP 325DNw Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 6, 9, 16
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Duplex printing modeManual
Time to first page (black, normal)8 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Printing colorsBlack, White
Maximum duty cycle35000 pages per month
Number of print cartridges1
Page description languagesPCL 5e, PCL 6
Total input capacity250 sheets
Total output capacity125 sheets
Paper tray media types-
Paper tray media weight52 - 163 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Standard interfacesEthernet, USB 2.0, Wireless LAN
Internal memory128 MB
Maximum internal memory- MB
Sound pressure level (printing)65.8 dB
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)120 W
Power consumption (printing)890 W
Package depth486 mm
Package width559 mm
Package height386 mm
Package weight15000 g
Cables includedAC
Server operating systems supportedWindows Server 2012 x64
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista, Y
Weight and Dimensions IconWeight and Dimensions
Depth392 mm
Width376 mm
Height262 mm
Weight12300 g

Related product manuals