Problem Causes Solutions
Print ends mid-job. An error might have occurred. Check the printer's display
panel to see if an error has
occurred.
"Resetting job..." appears and
printing is suspended.
Memory is insufficient. In [System], select [Memory
Usage] to [Font Priority].
Printing did not start even
though the specified print time
has already passed.
The time set on the printer or
computer is incorrect.
Set the correct time on the
printer or computer.
The Printed Image is Different from the Image on the Computer
Problem Solutions
The printed image is different
from the image on the
computer's display.
When you use some functions, such as enlargement or reduction,
the layout of the image might be different from that displayed on
the computer display.
Images are cut off, or excess
pages are printed.
If you are using paper smaller than the paper size selected in the
application, use the same size paper with that selected in the
application. If you cannot load paper of the correct size, use the
reduction function to reduce the image, and then print.
For details, see the printer driver's Help.
When Printer Is Not Functioning Properly
Problem Solutions
Paper is not fed from the
selected tray.
When you are using a Windows operating system, the printer
driver settings override those set using the control panel. Set the
input tray you want using the printer driver.
For details, see the printer driver's Help.
Prints do not stack properly. • Paper is damp. Use paper that has been stored properly. See
page 31 "Paper Precautions".
• If printed sheets come out curled, use the standard tray
extension. See page 10 "Guide to Components".
Other Printing Problems
71
To Next Page
Loading...
Need help?
General
Weight and Dimensions
