3. Open the front cover by pushing the front cover release button, and then close it to reset
the misfeed condition.
• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the paper jam is cleared.
Paper Misfeed Message (B)
The paper misfeed message " (B)" appears when a paper misfeed occurs in the internal paper feed
path.
• The inside of this printer becomes very hot. Before removing paper around the fusing unit, wait until
the temperature of the covers inside the fusing unit and paper transfer unit cools down.
Removing Jammed Paper
77
To Next Page
Loading...
