Control Panel
This section introduces the names of the parts of the control panel and explains their functions.
No. Name Description
1 [Power] key This indicator lights blue when the machine is turned on.
2 [Wi-Fi Direct] key (only
SP 377DNwX)
Pressing this key while Wi-Fi is disabled activates Wi-Fi and
reboots the machine automatically. Press this key while Wi-Fi is
enabled to activate or deactivate the Wi-Fi Direct function. This
indicator lights blue when the Wi-Fi Direct function is active. After
a long press of this key, configure the WPS using the PIN code or
in PBC mode. For details, see Setup Guide.
3 Network Indicator
(only SP 377DNwX)
This indicator lights blue when the network is connected.
4 [Stop] key Press this key once to pause a job that is currently printing. To
cancel a job, press it again.
5 [Start] key Press to restart the printing job.
6 Data In Indicator This indicator lights blue when the machine receives print data
from the host device.
7 Toner/Paper End
Indicator
This indicator lights red when the machine runs out of paper or
toner. It flashes when the toner is nearly empty.
Guide to Components
15
To Next Page
Loading...
