If a Paper Mismatch Occurs
The machine reports an error if:
• The paper type does not match the print job's settings when [Input Tray:] is set to [Auto Tray Select].
• The paper size does not match the print job's settings when [Size Mismatch Detection] under [Tray
Paper Settings] is enabled.
There are two ways to resolve these errors:
Continue printing using mismatched paper
Ignore the error and print using mismatched paper.
Cancel the print job
Cancel printing.
• If [Auto Continue] on Smart Organizing Monitor is enabled, the machine ignores the paper type
and size settings and prints on whatever paper is loaded. Printing stops temporarily when the error
is detected, and restarts automatically after about ten seconds using the settings made on Smart
Organizing Monitor. For details about configuring settings on Smart Organizing Monitor, see
page 65 "Using Smart Organizing Monitor".
Continuing printing using mismatched paper
If the paper is too small for the print job, the printed image will be cropped.
1. If the Alert indicator lights up, press the [Start] key.
Canceling a Print Job
You can cancel print jobs using either the machine's control panel or your computer, depending on the
status of the job.
Basic Operation of Printing
49
To Next Page
Loading...
