Specify whether to enable [Google Cloud Print]. When Google Cloud Print is disabled, [Local
Discovery] and [Timeout (seconds)] below cannot be configured.
• [Registration Status]
Displays the status of Google Cloud Print registration.
• [Registration Account]
Displays the Account (e-mail address) of Google Cloud Print registration.
• [Local Discovery]
Specify whether to enable local discovery.
• [Timeout (seconds)]
Enter the number of seconds the machine waits before an XMPP connection times out.
IPsec Settings
• This function is available only when an administrator password is specified.
IPsec Global Settings tab
• [IPsec Function]
Select whether to enable or disable IPsec.
• [Default Policy]
Select whether to allow for the default IPsec policy.
• [Broadcast and Multicast Bypass]
Select the services that you do not want to apply IPsec from the following:
[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
• [All ICMP Bypass]
Select whether to apply IPsec to ICMP packets (IPv4 and IPv6).
[IPsec Policy List] tab
Click the [IPsec Policy List] tab on the IP security settings page to display the list of registered IPsec
policies.
Using Web Image Monitor
59
To Next Page
Loading...
