5. Check there are no gaps between the paper and the paper guides; both side and end
paper guides.
6. Carefully push tray 1 straight into the machine.
To avoid paper jams, make sure the tray is securely inserted.
• The remaining paper indicator on the left front side of the paper tray shows approximately how
much paper is remaining.
Extending the Tray 1 to load paper (When Using SP 377DNwX)
This section explains how to load paper longer than A4 (297 mm) into the machine.
1. Pull out tray 1 carefully with both hands.
Place the tray on a flat surface.
2. Remove the tray 1 rear cover by pushing its center.
3. Release the extender lock on the left rear of the tray, and then pull out the extender until
it clicks.
Make sure the extender's inner surface and the scale are aligned.
2. Paper Specifications and Adding Paper
22
To Next Page
Loading...
