RICOH SP C250DN/SP C252DN Color Laser Printers
Getting Started Guide
12
5. Scroll [] to [WPS], and press [OK].
6. Select [PBC], and press [OK].
7. Firmly press the router’s [WPS] button, within two minutes.
Note:
• Connection succeeded: Display reads: PBC Connection Succeeded.
• Connection failed: Display reads: PBC Connection Failed. Restart the machine,
check that the router is working properly, and then try again. If the problem
persists, contact 1-800-RICOH38 (742-6438), option #1.
• Check wireless connection status: Press [Menu][Host Interface][Network Settings] [Wi-Fi
Config.] [Wi-Fi Status]. Display should read, Connected. To exit, press [Menu]. Note: Also see
Appendix B: Check Connection Status
.
• Confirm printer’s IP address: Press [Menu] [Host Interface] [Network Settings] [IPv4
Configuration]
[IP Address]. Write the IP address down. To exit, press [Menu]. The printer’s IP
address is also on the Configuration Report. See Appendix B: Print Configuration Report
.
8. Next, install Network Printer Driver. See 3.2 Network Printer Driver Install.
To Next Page
Loading...
