Ricoh SP C250DN

RICOH SP C250DN/SP C252DN Color Laser Printers
Getting Started Guide
24
Appendix
B
Check Connection Status
You can confirm that the connection to your printer is working properly from the
printer’s control panel or by using Web Image Monitor (WIM). WIM is a utility built into the printer,
which enables authorized users to easily view, program or change printer settings via a web browser
Printer Control Panel
1. Press [Menu].
2. Scroll [
] to [Host Interface], and press [OK].
3. Scroll [
] to [Network Settings], and press [OK].
4. Scroll [
] to [Wi-Fi Config.], and press [OK].
5. Scroll [
] to [Wi-Fi Status], and press [OK].
Web Image Monitor
Before proceeding, please check the following:
• Printer power switch is On.
• Printer is connected to network (via Ethernet cable).
• Printer’s IP Address is available.
Note: To view IP address from the control panel, press [Menu]  [Host Interface]  [Network Settings] 
[IPv4 Configuration]
 [IP Address]. Write the IP address down. To exit, press [Menu].
1. Open web browser.
2. In address bar, enter printer’s IP Address.
Home page displays…
Wi-Fi Status:
Connected