Message Cause Solution
" (B) Open Front Cover
and remove the paper."
Open the front cover and remove
the jammed paper from the
internal paper feed path.
For details, see page 114
"Removing Jammed Paper".
" (Y) Remove misfeed in
Trays. Opn & cls Frt. Cov."
Open the front cover and remove
any jammed paper.
For details, see page 114
"Removing Jammed Paper".
" (Z) Open Front Cover
and remove the paper."
Open the front cover and remove
any jammed paper from the
paper duplex unit.
For details, see page 114
"Removing Jammed Paper".
" Out of toner" The color toner has run out.
Replace the toner cartridge.
For details, see "Replacing the
Print Cartridge", Operating
Instructions.
" Waste Toner almost full" The waste toner bottle is almost
full.
Contact your sales or service
representative to obtain a new
waste toner bottle.
" Waste Toner Bottle full" Replace the waste toner bottle. For details, see "Replacing Other
Consumables", Operating
Instructions.
"@Remote Cert. update
failed"
Updating the @Remote certificate
failed.
Turn the printer off, and then turn it
on again. If the problem persists,
contact your sales or service
representative.
"Cannot
connect=>Comm.Serv.
Check proxy user/
password."
The proxy user name or password
is incorrect.
Check the proxy server settings,
and then change the user name
and/or password if they are
incorrect.
"Cannot connect with DHCP
server.(101/201)"
An IP address cannot be obtained
from the DHCP server.
Contact your network
administrator.
"Cannot print." The printer cannot print the sent
data.
Check that the file you want to
print is a supported file type.
Check the misfeeds and ask your
network administrator for help.
"Change (Tray name) to the
following settings:"
The size of the paper in the tray
does not match the paper size
specified in the printer driver.
Select a tray containing paper
that is the same size as the
specified paper size.
When Messages Are Displayed
69
To Next Page
Loading...
