Message Cause Solution
"Hardware Problem:
Wireless Card"
(A "wireless LAN interface
board" is referred to as a
"wireless card".)
The wireless LAN interface board
can be accessed, but an error
was detected.
• Turn off the main power
switch, and then confirm the
wireless LAN interface board
is inserted correctly. For
details about installing the
board, see "Installing the
Interface Units", Operating
Instructions.
• If the message appears
again, contact your service
representative.
"Load ppr blw in (Tray
name)."
The printer driver settings are
incorrect or the tray does not
contain paper of the size selected
in the printer driver.
Check that the printer driver
settings are correct, and then load
paper of the size selected in the
printer driver into the input tray.
For details about how to change
the paper size, see page 35
"Loading Paper".
"No toner. Replace Toner
Cartridge."
The toner has run out. Replace the
print cartridge.
For details, see "Replacing the
Print Cartridge", Operating
Instructions.
"No color toner. Color toner
is required to print in black
& white with the current
paper type. Replace the
color Print Cartridge or
press [Job Reset] to cancel
printing."
The color toner has run out.
Replace the print cartridge.
For details, see "Replacing the
Print Cartridge", Operating
Instructions.
"n ppr siz msmtch Select
new tray or use ppr size
below."
("n" is a tray name.)
The size of the paper in the tray
does not match the paper size
specified in the printer driver.
Select a tray containing paper
that is the same size as the
specified paper size.
"Printer font error." An error has occurred in the font
settings.
Contact your service
representative.
3. Troubleshooting
76
To Next Page
Loading...
Need help?
General
Weight and Dimensions
