149
5
Editing and Printing
7
Use the four-way controller (23) to select [Overwrite] or
[Save as].
8
Press the 4 button.
The image processed with the filter is saved.
Adjusts parts of the image that are too bright or too dark and processes images
to simulate an HDR effect.
1
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
2
Use the four-way controller (2345) to select (HDR
Filter) from the Playback Mode Palette.
3
Press the 4 button.
The preview image of the results of the filter effect appears.
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the confirmation dialog does not appear.
5
Use the four-way controller (23) to select [Overwrite] or
[Save as].
6
Press the 4 button.
The image processed with the filter is saved.
You can edit the image to look like an ink rubbing.
1
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
Using the HDR Filter
Using the Ink Rubbing Filter
The Ink Rubbing Filter cannot be used on the following images.
• Movies or images taken in (Report) mode
• Images taken with the recorded pixels of , h, h, l, or m
• Images taken with other cameras
An error message appears in step 3.
To Next Page
Loading...
Need help?
General
