Ricoh WG-4 GPS - Page 231

229
8
Appendix
1 Press the Q button after shooting still pictures or
movies.
The camera enters Q mode and an image appears on the display.
2 Press the 4 button until the Info 2 display appears.
If GPS information cannot be
obtained, “--” appears on the display.
*The date and time information is
displayed in GPS time (the reference
time scale of the GPS system). This
may be different from the time you
have set on the camera.
Displaying the GPS Information Recorded on Captured Image
The image on which the GPS information is recorded can be imported
to a computer using the supplied software “MediaImpression 3.6.2 LE”
(for Windows) and the location where the image was taken can be
displayed on the map.
Select an image in the preview screen and click (location) in the
[Property] area to display the map.
*To display the map, you need to connect your computer to the Internet.
10
10 0
-
003
00 38
100
-
0038
139
139
139
35
35
35
41' 29"
41' 29"
41' 29"
N
N
W
W
45' 52"
45' 52"
45' 52"
06: 25
:
00
06: 25
:
00
Edit
Edit
Edit
/04 0
4/'14
4/ '1 4
/04 0 4/'14
3200
3200 m
3200 m
ɋ
ɋ
180
180
180
700
700
hPa
hPa
700 hPa
GPS time
GPS latitude and
longitude
This part applies only to the RICOH WG-4 GPS camera