82
3
Taking Pictures
You can take pictures in natural colors by adjusting the white balance according
to the light conditions at the time of shooting.
1
Use the four-way controller (23) to select [White Balance] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
The [White Balance] screen appears.
3
Use the four-way controller (23)
to change the setting.
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller.
Adjusting the White Balance
F
Auto The camera adjusts the white balance automatically.
G
Daylight Use this mode when taking pictures outside in sunlight.
l
Shade Use this mode when taking pictures outside in the shade.
I
Tungsten Light
Use this mode when taking pictures under tungsten lamps
or electric lights other than fluorescent.
J
D
Daylight Colors
Fluorescent
Use this mode when taking pictures under fluorescent
light.
J
N
Daylight White
Fluorescent
J
W
White Light
Fluorescent
K
Manual Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color balance of
pictures taken with the white balance set to F.
• The white balance setting may not be changed depending on the selected
shooting mode. Refer to “Functions Available for Each Shooting Mode”
(p.172) for details.
OKMENMENU OKMENU
White Balance
AutoAutoAuto
D
OKOKCancelCancel OKCancel
To Next Page
Loading...
