1. Safety Notes
• 1.1) Personal Safety:
This e-bike is intended for use on paved roads or paths only. Using the e-bike for any other purpose may
result in serious injury. Before you ride this e-bike in a busy area or on public roads, practice riding in a safe
area free of hazards. Take time to learn the e-bike’s controls and power. It is your responsibility to identify
and follow all local laws and regulations, including fitting your e-bike with any additional equipment
necessary to comply with local laws. At night your e-bike MUST have white front lights and red rear lights lit.
It MUST also be fitted with a red rear reflector and amber pedal reflectors. Use caution when loading your
e-bike into a car or when mounting it on a bicycle carrier.
• 1.2) E-bike Safety:
You must be 18 or over to ride this e-bike. Your e-bike is designed for a maximum permitted overall
weight (rider + cargo) of 275lbs. You MUST have the bike inspected or assembled by someone
experienced with bike mechanics prior to use. Proper professional assembly is required for
upholding the Limited Warranty. We will require proof of professional assembly or post-
assembly sign-off by a bike professional for warranty coverage to be applied. Improper installation
could cause serious injury. Do not submerge your e-bike in water. Be aware that the speed at which you
are traveling may be faster than you are used to, especially when accelerating.
• 1.3) Electrical Safety:
Only use the charger supplied by Ride1UP. Do not store the bike or battery plugged into a wall outlet. Unplug
the battery before leaving the bike alone. Never modify the charger in any way. The charger has been
designed for a specific voltage, always check that the outlet’s voltage is the same as that stated on the rating
label. A charger that is suitable for one type of battery pack may create a risk of fire when used with another
battery pack; never use the charger with another appliance or attempt to charge this product with another
charger. Before use, check the charger cord for signs of damage. A damaged or entangled charger cord
increases the risk of fire and electric shock. Keep the charger cord away from hot surfaces and sharp edges.
Do not handle the charger with wet hands. Do not store or charge the appliance outdoors. The charger must
be removed from the socket before removing the battery, cleaning or maintaining the appliance.
• 1.4) Brake Safety:
Regularly check your brakes for signs of wear and tear. Any worn parts must be repaired or replaced
immediately. Be careful while getting used to the brakes. Practice emergency stops in a place clear of traffic
until you are comfortable controlling your e-bike. Wet weather reduces your braking power and the grip of
the tires. Reduce your speed and be aware of longer stopping distances when cycling in wet conditions.
Braking on unpaved surfaces will differ. Be sure to practice braking on different surface types. Ensure that
To Next Page
Loading...
