RIDGE RYDER RR50A - Background Operations - VOX Settings; Voice Operated Exchange (VOX)

PAGE 14
BACKGROUND OPERATIONS (continued)
VOX SETUP
When this function is enabled, you can begin transmitting by speaking, no need to press the [PTT]
button. If you want to make use of this function, you should insert the earpiece tted with the
transceiver.
1. With the radio turned off, press and hold [PF1] key and then turn on the transceiver. Keep pressing
[PF1] key for 3 seconds to enter into background operations.
2. Press “UP ARROW” or “DOWN ARROW” button to choose No.2 function item. It shows
“VOX” on LCD.
3. Press “(FUNC) BUTTON” to enter into function menu setup.
4. Press “UP ARROW” or “DOWN ARROW” button to set desired VOX level.
5. Press “(FUNC) BUTTON” to go back to previous menu. Press “(ESC/M) BUTTON”or “(
*
ENT)
BUTTON” to conrm and exit.
VOX DELAY SETUP
The fact that the transceiver sends the calling by VOX and instantly returns to receiving mode might
result in residual information loss. To avoid this loss, you can set suitable delay time.
1. Press and hold [PF1] button till the transceiver emits “a tone”, and then release it to enter into
background operation.
2. Press “UP ARROW” or “DOWN ARROW” button to choose No.3 function item. It shows
“VOXDEY” on LCD.
3. Press “(FUNC) BUTTON” to enter into function menu setup.
4. Press “UP ARROW” or “DOWN ARROW” button to set desired setup. 0.5S-5S, 10 levels of delay
time in total to choose, per level interval of 0.5S.
5. Press “(FUNC) BUTTON” to go back to previous menu. Press “(ESC/M) BUTTON”or “(
*
ENT)
BUTTON” to conrm and exit.
VOX BEEP SETUP
After enabling this function, the transceiver will beep when transmitting by VOX.
1. Press and hold [PF1] button till the transceiver emits “a tone”, and then release it to enter into
background operation.
2. Press “UP ARROW” or “DOWN ARROW” button to choose No.4 function item. It shows
“VOXTON” on LCD.
3. Press “(FUNC) BUTTON” to enter into function menu setup.
4. Press “UP ARROW” or “DOWN ARROW” button to set desired setup. ON: VOX beeping is
enabled. OFF: VOX beeping is disabled.
5. Press “(FUNC) BUTTON” to go back to previous menu. Press “(ESC/M) BUTTON”or “(
*
ENT)
BUTTON” to conrm and exit.