RIDGID EB44243 - Features

9
HEX KEY
STORAGE
AREA
SANDING BELT
ASSEMBLY
DUST
EXHAUST
PORT
PRODUCT SPECIFICATIONS
Motor ...................................................... 3/8 HP Induction
Phase ....................................................................... Single
Rotation of Shaft ...............................................Clockwise
No Load Speed ................................. 0-1725/rpm/spindle
No Load Speed .......................................0-1350/rpm/belt
Oscillation ..............................................................60/min.
FEATURES
Stroke ......................................................................3/4 in.
Sanding Sleeves .........1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in.
Sanding Drums .......................3/4 in., 1 in., 1-1/2 in., 2 in.
Sanding Belt ...................................................4 in. x 24 in.
Input .............................. 120 V, 60 Hz, AC only, 5.0 Amps
Net Weight .............................................................. 40 lbs.
R
E
M
O
V
E
aaaa
SWITCH
SPINDLE KNOB
SANDING
SLEEVE
SANDING SLEEVES /
THROAT PLATES /
WASHER STORAGE AREA
UPPER SPINDLE
WASHER
THROAT PLATE
TABLE
INSERT
TABLE
LOCK
KNOB
SLOTS FOR
SAW HORSE
MOUNTING
R
E
M
O
V
E
SANDING BELT
WORK REST
BELT
TENSION
LEVER
TABLE INSERT / SANDING
BELT STORAGE
WORKTABLE
TRACKING KNOB
Fig. 2