RIDGID R4040 User Manual

Cette scie a été conçue et fabriquée conformément aux
strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenu, cet outil vous donnera
des années de fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur
doit lire et veiller à bien comprendre le manuel
d’utilisation avant d’employer ce produit.
Su sierra ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de
uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe
leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
8 in. TILE AND PAVER SAW WITH LASER
SCIE À CARREAUX ET PAVES SOUS EAU
DE 203 mm (8 po) AVEC LASER
SIERRA PARA LOSAS Y PAVIMENTO
DE 203 mm (8 pulg.) CON LÁSER
R4040
To register your RIDGID product, please visit: http://register.RIDGID.com
Pour enregistrer votre produit de RIDGID, s’il vous plaît la visite: http://register.RIDGID.com
Para registrar su producto de RIDGID, por favor visita: http://register.RIDGID.com

RIDGID R4040 Specifications

General

Brand	RIDGID
Model	R4040
Category	Saw
Language	English

Summary

General Safety Rules

Electrical Safety Precautions

Guidelines for electrical connections, grounding, GFCI outlets, and extension cords.

Safe Tool Operation Practices

Practices for safe operation, maintenance, and proper use of accessories and tool parts.

Specific Safety Rules

Securing Workpiece and Avoiding Contact

Wheel and Adjustment Safety

Ensure correct wheels are used, adjustments are secure, and avoid touching moving parts.

Symbols and Signal Words

Signal Word Definitions

Explains the meanings of DANGER, WARNING, CAUTION, and NOTICE for hazard communication.

Product Symbol Explanations

Electrical Information

Extension Cord Usage Guidelines

Guidelines for selecting and using appropriate extension cords for power tools.

Grounding and Power Connection

Importance and procedure for grounding the tool and connecting to the correct power supply.

Electrical Safety Positioning

Assembly - Water System Installation

Installing Water Filter and Pump

Assembly - Table and Wheel Installation

Installing the Sliding Table

Installing the Cutting Wheel

Instructions for safely installing the cutting wheel onto the arbor.

Assembly - Wheel Securing and Guards

Wheel Installation and Tightening

Steps for placing the cutting wheel, washers, and tightening the arbor nut.

Installing Splash Guard Assembly

Operation Overview and Applications

General Operation Safety Warnings

Operation - Controls and Locking Mechanisms

On/Off Switch Operation and Locking

Locking/Unlocking Motor Head for Plunge Cuts

Procedures for unlocking and locking the motor head for making plunge cuts.

Operation - Cutting Techniques

General Cutting Tips and Line Alignment

Using the Laser Guide System

How to use the laser guide for accurate alignment and cutting.

Operation - Basic Cut Types

Making Cross Cuts and Rip Cuts

Making Diagonal Cuts

Operation - Angled and Corner Cuts

Making Miter Cuts

Operation - Bevel and Plunge Cuts

Making Bevel Cuts

Guide on how to tilt the motor head to make angled cuts (0°, 22.5°, 45°).

Making Plunge Cuts

Operation - Paver Corner Cuts

Adjustments - Squaring the Wheel

Safety Warning Before Adjustments

Critical safety warning to unplug the tool before making any adjustments.

Squaring Cutting Wheel to Table

Steps to ensure the cutting wheel is perfectly square to the saw table.

Adjustments - Sliding Table Rollers

Adjusting Sliding Table Cam Rollers

Adjustments - Rollers and Depth Stop

Adjusting Lower and Right Side Rollers

Depth Stop Adjustment Procedure

Adjustments - Positive Stops and Laser Alignment

Positive Stop Adjustments (0° and 45°)

How to adjust the positive stops for vertical and 45° bevel cuts.

Aligning the Laser Guide Line

Steps to align the laser guide line accurately with the cutting path.

Maintenance - General and Brush Replacement

Servicing Parts and General Cleaning

Warning on parts and guidelines for general cleaning and lubrication.

Motor Brush Replacement Procedure

Warranty Information

3 Year Limited Service Warranty Details

Details of the limited service warranty coverage and duration.

Obtaining Service and Warranty Exclusions

Customer Service and Support

Service and Parts Contact Information