RIDGID R4021 User Manual

Cette scie a été conçue et fabriquée conformément aux
strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenu, cet outil vous donnera
des années de fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur
doit lire et veiller à bien comprendre le manuel
d’utilisation avant d’employer ce produit.
Su sierra ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de
uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe
leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID, s’il vous
plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7 in. TILE SAW
SCIE À CARREAUX DE 178 mm (7 po)
SIERRA DE LOSAS DE 178 mm (7 pulg.)
R4021

RIDGID R4021 Specifications

General

Brand	RIDGID
Model	R4021
Category	Saw
Language	English

Summary

Introduction

General Safety Rules

Specific Safety Rules

Symbols

Electrical

Extension Cords

Guidance on selecting and using appropriate extension cords for the tool.

Electrical Connection

Details the power requirements and connection specifications for the saw.

Speed and Wiring

Information on the tool's operating speed and wiring considerations.

Grounding Instructions

Instructions and warnings related to proper grounding of the tool.

Features

Product Specifications

Lists technical specifications such as wheel diameter, rip capacity, and depth of cut.

Know Your Tile Saw

Guidance on familiarizing oneself with the tool's operation and safety features.

Tools Needed

Loose Parts

Assembly

Unpacking

Instructions for safely unpacking the product and checking for damage.

Mounting Holes

Details on how to securely mount the tile saw to a workbench.

Installing the Rear Support Table

Steps for attaching the rear support table to the saw.

Tile Cutting Wheel

Recommendations for using the correct cutting wheel for the saw.

Installing the Tile Cutting Wheel

Detailed instructions for installing the 7-inch tile cutting wheel onto the arbor.

Installing the Splash Hood

Steps for attaching and adjusting the splash hood for effective mist containment.

Installing the Rip Guide

Instructions for mounting and securing the rip guide to the saw table.

Installing the Miter Guide

How to install and position the miter guide for angled cuts.

Installing the Overflow Drain

Instructions for inserting the overflow drain into the water reservoir.

Filling/Changing the Water Reservoir

Guidance on filling and maintaining the water reservoir for wet cutting.

Operation

Applications

Lists the intended uses and material types for the tile saw.

On/Off Switch

Details the operation and safety features of the on/off switch, including locking.

Using the Miter Guide

Instructions for adjusting and using the miter guide for angled cuts.

Making Cuts

General advice and techniques for making precise cuts with the saw.

To Make a Cross Cut

Step-by-step guide for performing straight 90-degree cross cuts on tiles.

To Make a 45° Diagonal Cut

Detailed steps for making 45-degree diagonal cuts using the miter guide.

To Make a Miter Cut

Guide for making miter cuts on various materials with the saw.

To Make an L-Cut

Instructions for making L-shaped cuts by performing two separate cuts.

To Make a Bevel Cut

Steps for performing bevel cuts at 22.5 and 45 degrees using the bevel table.

Adjustments

Aligning the Rip Guide with the Cutting Wheel

Procedure for ensuring the rip guide is precisely aligned with the cutting wheel.

Splash Hood Bracket Adjustment

Instructions for adjusting the splash hood bracket for proper alignment.

Adjusting Locking Lever Assembly

How to adjust the locking lever assembly if the rip guide becomes loose.

Adjusting Rip Guide Movement

How to adjust the rip guide's movement for smooth operation using set screws.

Miter Guide Adjustment

Steps to adjust the miter guide's angle selector to the '0' position accurately.

Maintenance

General Maintenance

General advice on cleaning plastic parts and avoiding damaging chemicals.

Lubrication

Information on the lubrication of bearings for the tool's lifespan.

Cleaning the Rip and Miter Guides

Steps for cleaning the rip and miter guides to ensure smooth sliding.

Cleaning the Saw

Procedure for cleaning the saw, including removing parts and waste water.

Warranty Information

Warranty Coverage & Service

Covers 3-year limited warranty, 90-day guarantee, and service procedures.

Warranty Exclusions & Limitations

Outlines what is not covered and limitations on implied warranties.

Customer Service Information