To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R4090 and is the answer not in the manual?
Covers wearing safety glasses, proper attire, balance, clean work area, and keeping others away.
Focuses on grounding, extension cords, and avoiding wet environments.
Includes keeping guards in place, not forcing the tool, and preventing accidental starting.
Emphasizes GFCI protection, proper grounding, and cord inspection.
Covers staying alert, using correct wheels, checking parts, and proper servicing.
Warns against operating under influence and touching moving parts.
Covers securing work, avoiding wheel path, freeing stalled wheels, and turning off before disconnecting.
Addresses lighting, avoiding awkward positions, and handling damaged cords.
Explains signal words like DANGER, WARNING, CAUTION and their meanings.
Defines common symbols used on the tool and their corresponding meanings.
Details requirements for extension cords, including gauge, condition, and outdoor use.
Explains the tool's power requirements and the importance of proper grounding.
Advises using GFCI protection and positioning the saw to avoid wet connections.
Explains the purpose of a drip loop and precautions for wet connections.
Lists key technical specifications of the tile saw, including dimensions and performance ratings.
Covers the laser alignment system, miter guide, and multi-position cutting head.
Instructions for unpacking the saw, inspecting for damage, and checking parts.
Step-by-step instructions for installing the cutting wheel, including safety warnings.
Instructions for aligning the laser guide with the cutting wheel for accurate cuts.
Instructions for squaring the cutting wheel to the table using set screws.
Steps for adjusting the laser guide line's angle for alignment.
General
