RIDGID R4031 User Manual

Cette scie a été conçue et fabriquée conformément
aux strictes normes de fiabilité, simplicité d’emploi et
sécurité d’utilisation. Correctement entretenu, cet outil
vous donnera des années de fonctionnement robuste et
sans problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur
doit lire et veiller à bien comprendre le manuel
d’utilisation avant d’employer ce produit.
Su sierra ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad
de uso y seguridad para el operador. Con el debido cuidado,
le brindará muchos años de sólido funcionamiento y sin
problemas.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe
leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
To register your RIDGID
product, please visit: http://
register.RIDGID.com
Pour enregistrer votre
produit de RIDGID, s’il vous
plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7 in. TILE SAW
SCIE À CARREAUX
DE 178 mm (7 po)
SIERRA DE LOSAS
DE 178 mm (7 pulg.)
R4031

RIDGID R4031 Specifications

General

Brand	RIDGID
Model	R4031
Category	Saw
Language	English

Summary

Save This Manual for Future Reference

Introduction

General Safety Rules

Specific Safety Rules

Symbols

Electrical

Extension Cords

Guide on selecting and using extension cords for the tool.

Electrical Connection

Details on connecting the tool to a power supply.

Speed and Wiring

Information on tool speed and electrical wiring requirements.

Grounding Instructions

How to properly ground the power tool for safety.

Features

Product Specifications

Details the technical specifications of the tile saw.

Know Your Tile Saw

Overview of the tile saw's features and operation.

Tools Needed

Lists the tools required for assembly and alignment.

Loose Parts

Assembly

Unpacking

Instructions for unpacking the tile saw and checking parts.

Installing Motor Head Assembly to Frame

Steps to attach the motor head assembly to the saw frame.

Installing Motor Head and Base to Water Tray

Attaching the motor head/base assembly to the water tray.

Installing the Sliding Table

How to install the sliding table onto the saw rails.

Installing the Tile Cutting Wheel

Guide to installing the 7-inch tile cutting wheel.

Installing the Miter Guide

How to install the miter guide for angled cuts.

Installing the Water Pump

Steps to install the water pump for blade cooling.

Filling/Changing the Water Reservoir

Instructions for filling and changing the water in the reservoir.

To Control the Flow of Water

How to adjust the water flow selector on the pump.

Installing Splash Guard Assembly

Steps to assemble and install the two-part splash guard.

Installing Laser Batteries

How to install batteries into the laser guide compartment.

Using the Laser Guide

Instructions for using the laser guide for accurate cuts.

Assembling the Stand

Detailed steps for assembling the saw's stand.

Setting Up the Stand

How to properly set up and position the assembled stand.

Operation

Applications

Lists the intended uses and purposes of the tile saw.

On/Off Switch

Explains how to operate the power switch and its locking feature.

Locking/Unlocking the Motor Head for Plunge Cuts

How to lock/unlock the motor head for plunge cuts.

Making Cuts

General advice and techniques for making cuts with the saw.

To Make a Cross Cut

Step-by-step guide for performing a straight 90° cross cut.

To Make a Diagonal Cut

Instructions for making diagonal cuts at an angle.

To Make a Miter Cut

How to perform miter cuts at various angles.

To Make an L-Cut

Guide for making L-shaped cuts for corners or fittings.

To Make a Bevel Cut

How to make bevel cuts at specific angles.

To Make a Plunge Cut

Instructions for making plunge cuts into the material.

Adjustments

To Square the Cutting Wheel to the Table

How to align the cutting wheel perpendicular to the table.

To Adjust the Lower Table Rollers

How to adjust table rollers for smooth sliding movement.

To Change Cutting Wheel Depth

How to adjust the maximum cutting depth.

Positive Stop Adjustments

Adjusting the 0° and 45° positive stops for accuracy.

To Adjust the Laser Guide

How to adjust the laser guide line for precise cutting.

To Adjust the Head Screw

How to adjust the saw head screw for smooth movement.

Maintenance

General Maintenance

General advice on cleaning and care of the tool.

Lubrication

Information on lubrication for the tool's bearings.

Cleaning the Rails

How to clean the sliding table rails for smooth operation.

Cleaning the Saw

Steps for cleaning the tile saw reservoir and components.

Cleaning the Pump

Instructions for cleaning the water pump and intake screen.

Brush Replacement

Guide on how to replace worn motor brushes.

Cleaning the Water Nozzles

How to clean clogged water nozzles.

Warranty

RIDGID® Hand Held and Stationary Power Tool 3 Year Limited Service Warranty

Details the 3-year limited warranty for power tools.

90-Day Satisfaction Guarantee Policy

Explains the 90-day satisfaction guarantee policy.

What is Covered Under the 3 Year Limited Service Warranty

Specifies what is covered by the 3-year limited warranty.

How to Obtain Service

Instructions on how to get warranty service for the tool.

What is Not Covered

Outlines what the warranty does not cover.

Additional Limitations

Discusses additional limitations and legal disclaimers.