2
Dear Customer,
Thank you for choosing the BeSMART control. This control device for heating
(and cooling) systems and boilers is easily installed and, if used correctly,
offers better quality comfort as well as energy savings.
This thermostat has been designed to support a maximum of 2 A at 30 VDC
or 0.25 A at 230 VAC (specifications for internal relay to switch the boiler
“room thermostat” connection).
9
If the device is installed by a third party, please ensure that this manual
is given to the end user.
9
These instructions must be kept by the user.
COMPLIANCE
The BeSMART remote control panel complies with:
− Electromagnetic Compatibility Dir
ective 2014/30/EU
− Low Voltage Dir
ective 2014/35/EU
The following symbols are used in some parts of the manual:
9
CAUTION= for tasks which require particular care and suitable preparation.
0
FORBIDDEN = for tasks which MUST NOT be performed.
To Next Page
Loading...
