Riello BeSMART User Manual

Installer and User Manual
EN
Installer and User Manual
BeSMART
Thermostat | WiFi Box and boiler RF receiver
SET
PROG
RESET
ESC
MODE

Riello BeSMART Specifications

General

Connectivity	Wi-Fi
Control via App	Yes
Power Supply	230V AC
Communication	Wi-Fi 802.11 b/g/n
Features	remote control
Operating Temperature	0°C to +40°C
Display	LCD

Summary

COMPLIANCE

1 GENERAL INFORMATION

1.1 General notices

Important safety instructions and general advice for installing and using the BeSMART thermostat.

1.2 What is the BeSMART for?

1.3 Modes of use

1.4 Glossary of technical terms

1.5 BeSMART control Class Declaration, according to the ErP Directive

2 INSTALLATION

2.1 Contents of the package

Lists all components included in the WiFi BeSMART package, such as the BeSMART unit, WiFi Box, cables, and batteries.

2.2 Practical installation diagrams

2.3 Technical Data

2.5 Three-phase installation

3 COMMISSIONING

3.1 User interface

Explains the layout and buttons of the BeSMART thermostat's user interface for operation.

3.3 Setting the date and time

Step-by-step guide on how to set the date and time on the BeSMART thermostat.

3.4 Setting the heating/cooling mode

3.5 Setting the operating mode

3.7 Setting the heating/cooling time program in automatic operating mode

3.9 Setting the heating/cooling room setpoint temperature

3.12 Technical menu – Advanced programming

4 ALARMS AND OPERATING STATUSES

4.1 LED notification lights for the WiFi Box and boiler RF receiver

Explains the meaning of LED indicators on the WiFi Box and RF receiver for status and errors.

4.2 Boiler and BeSMART alarms