2
GB
Declaration
Declaration of conformity in accordance with ISO / IEC 17050-1
Manufacturer: RIELLO S.p.A.
Address: Via Pilade Riello, 7
37045 Legnago (VR)
Product: Forced draught gas burners
Model: RS 45/E BLU
These products are in compliance with the following Technical Standards:
EN 12100
EN 676
and according to the European Directives:
GAD 90/396/EEC Gas Devices Directive
MD 2006/42/EC Machine Directive
LVD 2006/95/EC Low Voltage Directive
EMC 2004/108/EC Electromagnetic Compatibility
Such products are marked as follows:
The quality is guaranteed by a quality and management system certified in accordance with UNI EN ISO 9001.
Declaration of Conformity A.R. 8/1/2004 & 17/7/2009 – Belgium
Producer: RIELLO S.p.A.
37045 Legnago (VR) Italy
Tel. ++39.0442630111
www.rielloburners.com
Distributed by: RIELLO NV
Ninovesteenweg 198
9320 Erembodegem
Tel. (053) 769 030
Fax. (053) 789 440
e-mail. info@riello.be
URL. www.riello.be
It is hereby certified that the apparatuses specified below conform with the model of the type described n the CE conformity declaration and they are
produced and placed in circulation in conformity with the provisions defined in L.D. dated January 8, 2004 and July 17, 2009.
Product type: Forced draught gas burners
Model: RS 45/E BLU
Standard applied: EN 676 and A.R. dated January 8, 2004 - July 17, 2009
Measured value: RS 45/E BLU CO max: 5 mg/kWh
NOx max: 77 mg/kWh
Controlling organisation: TÜV Industrie Service GmbH
TÜV SÜD Gruppe
Ridlerstrase, 65
80339 München DEUTSCHLAND
Manufacturer's Declaration
RIELLO S.p.A. declares that the following products comply with the NOx emission limits specified by German standard “1. BImSchV reliese
26.01.2010”.
Product Type Model Power
Forced draught gas burners 827 T3 RS 45/E BLU 90 - 550 kW
Legnago, 30.01.2012 Mr. G. Conticini
Burners Division Department
RIELLO S.p.A.
CE-0085BM0104 Class 3 (EN 676)
To Next Page
Loading...
