Riello RS 45/E BLU - Appendix - Accessories (on Request)

50
GB
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the power to the request for heat, ensuring great stability for the parameter
controlled: temperature or pressure.
Two components should be ordered:
• the output regulator to install on the burner;
• the probe to install on the heat generator.
Software interface kit (ACS410 + OCI410.30) - Service Level
Code 3010436
Modbusinterface Kit (OCI412)
Code 3010437
Gas trains in compliance with standard EN 676 (complete with valves, pressure adjuster and filter)
Gas train - burner adapters
* With this train the integrated leak detection cannot be activated.
Note: See the accompanying instructions for the adjustment of the gas train.
PVP kit (Pressure Valve Proving)
Code 3010344
Continuous purging kit
Code 3010094
Differential switch Kit
Code 3010465
Maximum gas pressure switch Kit
Code 3010466
Parameter to be checked Probe Output regulator
Adjustment field Type Code Type Code
Temperature - 100...+ 500°C PT 100 3010110
RWF40 3010417
Pressure
0...2.5 bar
0...16 bar
Output probe
4...20mA
3010213
3010214
Gas train
Gas train - burner
adapter
Code Model Ø Code
3970602* Multibloc MBC DLE 120 3/4” 3000824
3970599 Multibloc MB DLE 407 S52 3/4” 3000824
3970258 Multibloc MB DLE 410 S52 1”1/4 -
3970256 Multibloc MB DLE 412 S52 1”1/4 -
3970250 Multibloc MB DLE 415 S52 1”1/2 -
3970257 Multibloc MB DLE 420 S52 2” 3000822
Appendix - Accessories (on request)
B