Riello RS 70 - 1 Declarations

3
20144609
GB
Declarations
1 Declarations
Declaration of conformity in accordance with ISO / IEC 17050-1
Manufacturer: RIELLO S.p.A.
Address: Via Pilade Riello, 7
37045 Legnago (VR)
Product: Forced draught gas burners
Model and type: RS 70
RS 100
RS 130
821 T1
822 T1
823 T1
These products are in compliance with the following Technical Standards:
EN 676
EN 267
EN 12100
and according to the European Directives:
GAR 2016/426/EU
MD 2006/42/EC
LVD 2014/35/UE
EMC 2014/30/UE
Gas
Appliances Regulation
Machine Directive
Low Voltage Directive
Electromagnetic Compatibility
Such products are marked as follows:
Quality is ensured by means of a quality and management system that is
ISO 9001:2015 certified.
Legnago, 21.04.2018 General Manager
RIELLO S.p.A. - Burners Department
Research and Development Director
RIELLO S.p.A. - Burners Department
Eng. U. Ferretti Eng. F. Comencini
EC -0085AP0944
EC -0085AP0945
EC -0085AP0946