RigExpert AA-1000 User Manual

5
2. Specifications
Frequency range: 0.1 to 600 MHz – AA-600
0.1 to 1000 MHz – AA-1000
0.1 to 1400 MHz – AA-1400
Frequency entry: 1 kHz resolution
Measurement for 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1 to 100 in numerical mode,
1 to 10 in graph mode
SWR display: numerical or easily-readable bar
R and X range: 0…10000, -10000…10000 in numerical mode,
0…1000, -1000…1000 in graph mode
Display modes:
- SWR at single or multiple frequencies
- SWR, return loss, R, X, Z, L, C at single frequency
- SWR graph, 80 points
- R, X graph, 80 points
- Smith/polar chart, 80 points
- TDR (Time Domain Reflectometer) graph
Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph
modes.
RF output:
- Connector type: N
- Output signal shape: rectangular, 0.1 to 200 MHz. For higher
frequencies, harmonics of the main signal are used.
- Output power: -10 dBm (at 50 Ohm load)
Power:
- Three 1.5V, alcaline batteries, type AA
- Three 1.2V, 1800…3000 mA·h, Ni-MH batteries, type AA
- Max. 3 hours of continuous measurement, max. 2 days in stand-by
mode when fully charged batteries are used
- When the analyzer is connected to a PC or a DC adapter with USB
socket, it takes power from these sources
Interface:
- 320x240 color TFT displaty
- 6x3 keys on the water-proof keypad
- Multilingual menus and help screens
- USB connection to a personal computer
Dimensions: 23·10·5.5 cm (9·4·2”)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 650g (23 Oz)

RigExpert AA-1000 Specifications

General

Brand	RigExpert
Model	AA-1000
Category	Measuring Instruments
Language	English