Test/Cal Settings
Press Utility Test/Cal, enter the following menu.
Figure 2-78 Test Menu
Table 2-30 Test Setting Menu
1. Test
Press Utility Test/Cal Test, to perform self-testing.
When the instrument is powered, the system will perform the self-testing
automatically. This limited test can test if the instrument could work ordinarily.
To perform a general test needs 3 seconds. If all the tests have been passed, you
can use the generator freely.
If the general test has been passed, the screen will show “Self-Test Passed”; if not,
it will also tell you self-test failed and display the error message.
To Next Page
Loading...
Need help?
General
