EasyManua.ls Logo

Rigol DG1012 - User Manual

Rigol DG1012
150 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User’s Guide RIGOL
Publication Number UGB06109-1210
Nov. 2008
Dual-Channel Function/Arbitrary
Waveform Generator
DG1022, DG1012
© 2008 RIGOL Technologies, Inc.
All Rights Reserved

Table of Contents

Questions and Answers

  • K
    Kevin MorganAug 10, 2025
    What to do if my Rigol Inverter settings are correct but no waveform is generated?
    • L
      Lauren ZavalaAug 11, 2025
      If your Rigol Inverter isn't generating a waveform despite correct settings, first, verify that the BNC cable is securely connected to the signal output terminal and that the cable itself is functioning correctly. Also, check that the Output button is activated. If these steps don't resolve the issue, try resetting the instrument by pressing Utility ? System ? Setting ? PowOn ? Latest and then restart the device.
  • C
    Curtis CardenasAug 25, 2025
    Why is the screen black after powering on my Rigol Inverter?
    • B
      Brandi NelsonAug 26, 2025
      If your Rigol Inverter screen remains black after powering it on, ensure the power cord is correctly connected and that both the front and rear power switches are turned on. After checking these connections, restart the instrument. If the screen is still black, it may indicate a more serious issue.

Rigol DG1012 Specifications

General IconGeneral
Output Channels2
Sample Rate100 MSa/s
Vertical Resolution14 bits
Waveform TypesSine, Square, Ramp, Pulse, Noise, DC
Output Impedance50 Ω
Modulation TypesAM, FM, PM
Power Supply100 - 240 V AC, 50/60 Hz

Related product manuals